5m Industrial Ceiling Fan, 750W HVLS

• Diameter: 5m
• Airflow: 10,000 m³/min
• Coverage: 500 m²
• Noise level: 38 dB
• No gearbox: 750W PMSM
• Roof height: 3.6 to 6m
• 5-year warranty, installed by certified electrical partners

$6,300.00

$6,300.00

Get a quote, supply & install
- +
SKU: FH-ICF-50 Category:

About this fan

The most air per watt in the range

The 4.3m and the 5m use the same 750W motor. The 4.3m moves 7,000 cubic metres a minute; the 5m moves 10,000. That is 43% more air for the same power draw and $100 more on the price, and it is the single most useful comparison in this whole range.

The reason is geometry rather than a better motor. Swept area grows with the square of the diameter, so going from 4.3m to 5m adds about 35% more disc for the blades to work with. The fan then turns more slowly, 20 to 80 rpm against 20 to 90, and still shifts considerably more air. Bigger and slower wins almost every time in this category.

Where the extra 0.7 metres costs you

Two things. The minimum mounting height rises from 3m to 3.6m, so buildings between 3 and 3.6m are ruled out and need the 4.3m or the 3.7m instead. And the sweep is 0.7m wider, which matters when you are threading a fan between sprinkler heads, lighting runs and a mezzanine edge.

If neither applies to your building, the 5m is the better buy. If either does, the 4.3m exists for exactly that reason.

Build and warranty

Five aluminium-magnesium alloy aerofoil blades, permanent magnet direct drive with no gearbox and nothing to oil, variable frequency controller included, 38dB, and 5 years of warranty on a certified installation. At 49kg it sits at the light end of the range, so mounting is straightforward on most structures.

How installation works

Hardwired to its variable frequency controller and bolted to structural steel or concrete, through a licensed electrical contractor. Mounting hardware for concrete, I-beam and square steel is included, along with a safety cable independent of the main bracket. The fan is supplied by Festoon House as an authorised Down Under Fans reseller, and installed by our own licensed electricians across New South Wales.

The two things worth checking before ordering this size are the 3.6m minimum mount height and the 5m sweep. Sprinkler heads and light fittings inside that circle are the usual reason a fan moves a bay over, and it is much cheaper to find that out at quote stage.

The 5-year warranty requires certified installation and is void if the fan is later relocated. How installation works

Common questions

Should I buy the 5m or the 4.3m?
The 5m, unless your roof is under 3.6m or the extra 0.7m of sweep does not fit. It moves 43% more air for the same 750W and costs $100 more. Those two constraints are the only reason to choose the smaller fan.
Will it clear a 4m roof?
Yes, comfortably. The rated range is 3.6 to 6m, so 4m sits near the bottom of it and uses a short extension rod. Tell us what is stored underneath so blade clearance can be confirmed.
How many for a 2,000m² warehouse?
Four on paper, at 500m² each. In practice racking runs and dividing walls cut a fan’s reach, so a 2,000m² floor with two racking aisles often works better as five fans placed by aisle rather than four on a grid. Send a floor plan and we will lay it out.

Where this fan fits: part of the industrial ceiling fan range, supplied and installed through certified electrical partners. See how it is sized for factory floors and warehouses, or start at the industrial fan range.

5M INDUSTRIAL CEILING FAN, 750W HVLS SPECIFICATIONS

MODEL FH-ICF-50
DIAMETER 5.0m
BLADES 5, aluminium-magnesium alloy
AIRFLOW 10,000 m³/min
COVERAGE AREA Up to 500m²
EFFECTIVE AREA 300m²
ROTATION SPEED 20 to 80 rpm, variable
MOTOR 750W PMSM direct drive
VOLTAGE 220 to 240V / 380 to 460V
FREQUENCY 50/60Hz
NOISE 38dB
FAN WEIGHT 49kg
MOUNTING HEIGHT 3.6 to 6m
MOUNT TYPES Concrete, I-beam, square steel
CONTROLLER Variable frequency, included
WARRANTY 5 years, certified install required

Figures are the manufacturer’s, taken from the product manual. Coverage assumes an unobstructed floor.

Expected Delivery Times

Festoon House will endeavour to ship all in-stock products for your order within 2 business days once payment has been cleared.

Typical delivery times after dispatch from our Sydney warehouse:

  • Eastern States NSW/VIC/ACT/QLD are between 1 – 3 business days.
  • Other States WA/SA/TAS/NT delivery times are between 3 – 6 business days.
  • Rural locations, please allow an additional 1 – 2 business days on the above estimates.

Complete Shipping & Returns Information

For full shipping & returns information please see our shipping & returns page here.

Lighting Up Aussie Homes, Venues & Events

FREQUENTLY ASKED QUESTIONS

For a full list of our most frequently asked questions and answers, pleease refer to our FAQ page here.
If you have any questions after reading our FAQ guide, feel free to give us a call or send us an email.

Frequently Bought Together

0

Business Hours

Mon – Fri: 9am – 5pm AEDT
Sat – Sun: Closed